Friday, May 24, 2013
Painting plastic car with his hands
In the car the most important role played by its specifications. Nevertheless, many motorists want their vehicle looked excellent and the outside, because at present the style and well-groomed appearance of the machine is as important as the inner content. There are many companies that deal with the tuning of the car, that is, equip him all sorts of designs that adorn cars. This may be aerodynamic body kits, bumpers and door sills. However, such "decorations" may eventually wear out, there are scratches and chips. Improve the look of the car can not only expensive salons, but also with their own hands by resorting to the help of a number of tools, and spent a little time. So, how can you paint the car yourself? First you need to prepare the item you intend to paint. Firstly, it should be removed from irregularities with a special putty, and then cover the soil for plastic. But above all, use White Spirit or 646 solvent, it will help remove all the fat, also in handy anti-static, the dust are not attracted to the material. Still need to take into account that if the plastic is stained before, not necessarily his prime, it is enough to rub the fine sandpaper. In general, plastics can be divided into two major groups - the stuff that requires pre-priming and therefore is not required. Therefore, experts advise to carefully consider the coating of plastic, if the paint holds up well, then blot it is not necessary. By the way, the soil may be different shades, so try to trim it carefully to the color of paint. The second step in the process of painting plastic car is its filling. Please note that filler for plastics is different from the usual, its feature is the high level of plasticity. That the process of dyeing is not formed in cracks and crevices, after applying the filler, you should use a special abrasive paper. In stores you can find different kinds of paints for the car. A knowledgeable people say that it is very easy to use tools that come in aerosol cans. Very few layers of paint is applied, usually in 3-4.Obyazatelno try to dry the paint after each layer. If used in paint, metallic, one must also apply a coat of varnish, about 20 minutes after the last staining. And finally, the final step is to process the material is colored wax polishing paste, it is good because it makes the surface more smooth, hiding all the errors of the staining of plastic parts. Of course, the room in which the process of working with paint should be light and air, which is important for both human health and for the most staining - the material should not get a lot of dust. And most importantly - be confident in their abilities.
No comments:
Post a Comment