Tuesday, May 28, 2013
Painting car interior with their own hands
Since the coating of a car gets older and eventually ceases to perform its protective functions there is a need to complete painting. Of course painting interior exacting work at home, but workable. The fact that the auto body shop after washing was dried in a chamber at a temperature of 90 degrees. In a domestic environment, you can use industrial dryers. The very process of painting takes up only ten percent of the time, and the rest of the time uhoditna training vehicle. In order to prepare the car for painting we need: abrasive paper and mount to it, two part putty, primer, solvent, white spirit, cotton rags, paint gun, "Sadolin". The first step is to wash and dry the car, after performing the disassembly of the body, in part, removing decorative and rubber parts. Before you remove the old paint and shoot it can be both mechanical and chemical methods to uncover pockets of corrosion, and remove the rust before the advent of pure iron, then apply primer. After removing the old coating must, with the help of white spirit, to degrease the body. At the same importance is the fact that, after degreasing should not be left any lint or by hand, nor of the tissue. Then you can begin to paint the car. The first plot the so-called Developing a layer, it is four parts paint and one part "Sadolin". This is done to detect surface defects after the fillers. Paint is applied as follows: first box, and then door and window openings and the main surface - horizontal movements, and always on top vniz.Takzhe should apply two coats of paint. After painting the car can be dried in the sun to dry must be within two or three days in the garage. But this is not vse.Pochti all machines there black or gray plastic, which quickly become boring. Exit est.Nado krasit.Konechno can buy expensive paint Folia Tec, but it is not an option, why throw away a lot of money. You just need to go to the nearest car market and choose the paint. On the interior of any car it takes an average of about two bottles of paint, we paint the instrument panel, door handles and center console, about three-cylinder platifikatora and varnish. The process is as follows. After drawing two or three layers of plasticizer giving it to dry. When the plasticizer is dry apply two coats of paint, with an interval between the deposition of each layer is about fifteen minutes. And the final step in applying the varnish. Where the surface are in contact with the fingers should be applied more polish. In that case if you correctly paint your room, paint will stick around for four years. The main thing with painting is not to overdo it and do not apply paint more than necessary. Now after you've made a painting of your car, you just allow it to dry and to calculate how much you saved on it.
No comments:
Post a Comment