Car 2013

How to Change the Brakes on a 320CLK

Remove Worn Brakes
1. Loosen the bolts or lung nuts on the Mercedes 320 CLK wheels with a socket.
2. Raise the Mercedes 320 CLK coupe with a hydraulic pump or floor jack. Support the coupe with jack stands.
3. Remove the wheel and tire off the Mercedes.
4. Remove the old brake pads and retaining pins using a socket and ratchet.
5. Clean the brake caliper where the brakes usually sit. Inspect the brake caliper and dust cap for damage. Replace parts that have leaks or imperfections.
6. Inspect the disc brakes for deterioration.
7. Review the master cylinder reservoir to check the level of brake fluid. Siphon the fluid until the reservoir is at half capacity.
8. Use a c-clamp to apply pressure on the brake caliper.
Install New Brakes
9. Place the dust cap, if it appears worn. Resurface or replace the rotor, if its damaged. Replace the rubber seal near the guide if worn.
10. Put the new brake pads, retaining springs and retaining pins on the brake caliper.
11. Refill the brake fluid levels in the master cylinder reservoir.
12. Pump the brake pedals several times to accurately set the brake pads.
13. Put the wheels and tires back on the 320 CLK.
14. Lower the Mercedes 320 CLK back to the ground. Ensure the brake pedal feels firm before driving the car.