Car 2013

1. Insert the key into the ignition. Leave the key in the Off position.
2. Press the odometer button. Hold the button down. Turn the key to the Acc position.
3. Release the odometer button after reset appears on the display.
4. Press and hold the odometer button until reset flashes in the display. Release the button.
5. Press and release the odometer button. END SIA appears in the display for two seconds, indicating the reset was successful.

1. Insert the key into the ignition and turn it to the first position. This is where the ignition comes on, but the engine does not start. The lights on the dash should illuminate and the FSS display will turn on.
2. Press the R button twice. This is the button located directly beneath the FSS display, which is also marked mileage. The number of days and miles remaining on the current service interval will show on the screen.
3. Turn the key back to the off position. Then, hold down the R button and turn the key back to the same position. Continue holding the button until a beeping sound is heard. The system has now been reset and you may release the button.

1. Turn the ignition switch to the II position without starting the engine.
2. Press the radio power button to turn it on. Wait for CODE to appear on the radio display.
3. Press the radio station preset buttons to enter the security code. The radio turns off and resets when the last digit of the code is entered.
4. Turn the radio on. The radio now functions normally.

1. Locate the fuse panel cover on the drivers side dashboard, near the foot well. Use your fingers to pull down on it from the top.
2. Find a large port on the fuse panel. Plug the connective end of the OBD reset tool into this port.
3. Put the key into the ignition and turn it to the on position. Dont turn on the engine, though. This will power on the OBD reset tool automatically.
4. Wait for the codes to flash on the OBD reset tool screen. Use the arrow keys on the reset tool to find and select Delete on the menu screen. Some OBD reset tools have a Delete button on the face of the tool. Either way, select Delete and wait for the ABS light to blink and then turn off on the instrument panel.
5. Unplug the tool from the port and replace the fuse panel cover. Turn off the vehicle and wait 60 seconds. Turn the engine on and verify the ABS light is off.

1. Turn the vehicle off and locate the center button on the right side of the instrument panel.
2. Hold the center button while switching the ignition to the “ON” position. Release the center button and wait for the instrument panel display to read “SERVICE!”.
3. Press and hold the farthest button on the right near the center button. Wait for the service indicator light to clear, and then turn off the ignition.