Car 2013

1. Start your BMW and activate the Bluetooth on your cell phone. When the car is turned on, it is in pairing mode and will look for a cell phone.
2. Select Bluetooth on your phones Bluetooth connections menu. This option may be called Connections and varies with the type of phone you own. Select the option that lets your phone search for Bluetooth devices. Consult your phones owners manual for specific instructions on how to complete this step.
3. Wait for your phone to locate your BMW. When it finds your BMW, you will see BMW followed by five numbers, which are the last five digits of your BMWs VIN number. Select the confirmation option when your phone asks you if you want it to sync with the vehicle.
4. Enter the Passkey number when your phone prompts you. You can find the passkey inside the booklet that includes your owners manual. The passkey is four digits and will be listed after PK, the abbreviation for passkey. You have about 20 seconds to enter the passkey on your phone before the sync process ends. If the sync is successful, you will see Loading Phonebook flashing on your radios display screen. Your phonebooks contacts will load to your radio where you can access them. It could take a few minutes for your contacts to transfer.

Fixed Code Garage Door Opener
1. Turn the 325i’s ignition to the “2” position.
2. Press and hold both outside keys on the vehicle’s garage door opener interface until the light on the interface flashes. Release the buttons.
3. Hold the garage door opener remote within two inches of the garage door opener interface on the BMW.
4. Press and hold the “open” button on the garage door opener remote, and at the same time the desired button on the garage door opener interface on the BMW. Release both buttons as soon as the light on the garage door opener interface flashes rapidly.
5. Program any additional devices by repeating steps 3 and 4, using the remaining two buttons on the garage door opener interface.
Rolling Code Garage Door Opener
6. Follow steps 1 through 4 in the section “Fixed Code Garage Door Opener.”
7. Enter the programming mode on the garage door opener. This varies greatly, depending on the type and brand of opener, so refer to the opener’s instructions for specifics. Most openers, however, have a “Program” button you press and hold to enter this mode.
8. Press the button on the BMW’s garage door opener interface with which you programmed the garage door opener remote in the section “Fixed Code Garage Door Opener” three times.

1. Turn your vehicles ignition off and press and hold the two outer buttons on your Audis system until the red indicator light begins to flash.
2. Press and hold the button on the remote you wish to program until the indicator light begins flashing.
3. Leave your car and hold your remote near the right headlight.
4. Press the open button on your remote and hold it until the hazard lights blink three times.
5. Press and hold the HomeLink training button inside of the car until the indicator light glows solid. If the light does not turn solid, continue to the following steps.
6. Press and hold the smart button on your garage motor, located on the side or back near the antenna wire.
7. Press the train button on your Audi system within 30 seconds of pressing the smart button and wait for the indicator light to glow solid. The programming will now be complete and your remote will be ready to use.

1. Close all of the cars doors and open the trunk and the drivers side door. Sit in the drivers seat and close the drivers door behind you.
2. Insert your key into the ignition and cycle it from Off to On five times in five seconds.
3. Wait for a chirp to sound from the car and open and close the drivers door.
4. Press any button on your remote and wait for the light on the remote to flash to indicate successful programming.
5. Close the trunk lid to end the programming sequence.